Tuesday, January 10, 2012

Bumble




Sometimes the yarn just tells you what it is going to be.

As soon as I saw the three colors of Quince and Co's Chickadee sitting together on my desk, the idea for this hat came to me – and I knew there had to be a bee in it somewhere.

The design features a rolled edge, corrugated ribbing, and stranded colorwork. On the top of the hat, a bee motif is worked over one segment of the crown. After blocking, the body and head of the bee are recolored using duplicate stitch.

The tam uses approximately half a skein of each of three colors of Quince and Co. Chickadee – Storm, Carrie's Yellow, and Egret – and is sized to fit an average woman's head.

The Bumble pattern is available for purchase in my Ravelry pattern store.




Blocking Bumble

Blocking tams has been a bit of a problem for me in the past. It's not always easy to find a dinner plate of the right shape and size – in fact, mine are square. I've pinned tams out to a blocking board, but I wasn't that happy with the results. No matter how many pins I place, I always seem to get points along the edge.

For Bumble, I thought I'd try making a custom blocking form instead. I took a piece of Gator Board – the tougher cousin of Foamcore – marked out a 10" circle with a compass, and cut it out with a matt knife. Gator board is not easily affected by water and since the core is expanded foam, it's pinnable.


I slipped the damp tam over the form, matched the fold line to the outer circumference of the disk, and pinned it along the edge. Then to keep from crushing the band and to allow for air circulation I set it on top of a small box that fit just inside the band. The tam dried quickly, and came out flat and round.

2 comments:

  1. Love your new Bumble tam pattern and how clever of you to make your own custom tam block!

    ReplyDelete
  2. I love the tam! Since Deborah means bee, I think that hat is in my future.

    ReplyDelete

Note: Only a member of this blog may post a comment.